# Settings

<figure><img src="https://1290078551-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FA982xwl6F0tpLlie7WHW%2Fuploads%2FtTHWkUAPXjOGZN57RvlY%2Fimage.png?alt=media&#x26;token=666a883e-1bed-4ccc-86e5-87b939efc5ce" alt=""><figcaption></figcaption></figure>

## Discord Webhook

Checkout Notifications for Successful Mints & Opensea Snipes will be directly sent to your private Discord channel. If you would like to receive notifications, continue reading...

<figure><img src="https://1290078551-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FA982xwl6F0tpLlie7WHW%2Fuploads%2F6q2oToLRXkunUvpuJqr9%2Fimage.png?alt=media&#x26;token=fcbbb012-0740-49f5-8003-f5dab039e4ef" alt=""><figcaption></figcaption></figure>

**1.) Create a Discord Channel and \[&#x20;**_**Edit Channel ]**_

![](https://1290078551-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FA982xwl6F0tpLlie7WHW%2Fuploads%2FziPA6O4BS9wZDzWYFJaW%2Fimage.png?alt=media\&token=42f29cbe-15c3-40a0-b6a7-107a2b821604)

**2.) Navigate to the Integrations tab and Create Webhook**

<div align="left"><figure><img src="https://1290078551-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FA982xwl6F0tpLlie7WHW%2Fuploads%2FKbJ1oEAOEdGvVyxbqnXw%2Fimage.png?alt=media&#x26;token=5072788c-1656-43ef-b4b2-75fd98598e4e" alt=""><figcaption></figcaption></figure></div>

_**3.) Copy Webhook URL**_

<div align="left"><figure><img src="https://1290078551-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FA982xwl6F0tpLlie7WHW%2Fuploads%2FG93xBQ9OqaUABRJYKCTk%2Fimage.png?alt=media&#x26;token=70384bca-bd07-4615-af1a-722dfc71365c" alt=""><figcaption></figcaption></figure></div>

_**4.) Paste Webhook URL in Reflektor's Settings**_

<figure><img src="https://1290078551-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FA982xwl6F0tpLlie7WHW%2Fuploads%2FViQahC6VehhdbNcjr79P%2Fimage.png?alt=media&#x26;token=c022a48c-1f90-4a3b-860a-6c091929f37c" alt=""><figcaption></figcaption></figure>

_**5.) Test Discord Webhook to make sure you receive a notification in the discord channel.**_&#x20;

![](https://1290078551-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FA982xwl6F0tpLlie7WHW%2Fuploads%2FEdspQBXEVBtkLebs8Ivu%2Fimage.png?alt=media\&token=3aeabdab-486e-45e9-a858-439f84f23613)

**6.) Save Settings, always confirm that you Save Changes.**

<div align="left"><figure><img src="https://1290078551-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FA982xwl6F0tpLlie7WHW%2Fuploads%2FFK837C6bUgnTm7W0DuK8%2Fimage.png?alt=media&#x26;token=803f99c9-efe5-45d9-97f9-245f88087727" alt=""><figcaption></figcaption></figure></div>

## Nodes

By default, Reflektor uses Infura to connect and transact with the Ethereum blockchain. However, to maximize efficiency of our software... we recommend using your own nodes. Users should start out with Free Node Providers, before exploring any paid providers.

<figure><img src="https://1290078551-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FA982xwl6F0tpLlie7WHW%2Fuploads%2FH0wBOnIUIbwkJf2p1DXt%2Fimage.png?alt=media&#x26;token=551e3a6d-d592-4bb9-9285-c194b2fc7ebf" alt=""><figcaption></figcaption></figure>

[**Alchemy**](https://www.alchemy.com/) **/** [**ZMOK**](https://zmok.io/)

**1.) Sign Up for a Node Provider and navigate to the API Keys where you'll find two endpoints.**&#x20;

**2.) Copy the endpoint (https or wss).**

**3.) Paste Endpoint into Monitor Node & Minting Node. You can use the same node.**

<figure><img src="https://1290078551-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FA982xwl6F0tpLlie7WHW%2Fuploads%2F3eElwyNnQ6SjCWlOdEup%2Fimage.png?alt=media&#x26;token=b0f5e66d-9c3d-46c9-878b-e167f9ff8590" alt=""><figcaption></figcaption></figure>

_**4.) Test RPC Connection to make sure your node is properly connecting.**_

<div align="left"><figure><img src="https://1290078551-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FA982xwl6F0tpLlie7WHW%2Fuploads%2F0CvQPcEgBR1rg0xAWKSx%2Fimage.png?alt=media&#x26;token=c5e42cd4-f750-43ca-b938-0b40936917c3" alt=""><figcaption></figcaption></figure></div>

**5.) Save Settings, always confirm that you Save Changes.**

<div align="left"><figure><img src="https://1290078551-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FA982xwl6F0tpLlie7WHW%2Fuploads%2FFK837C6bUgnTm7W0DuK8%2Fimage.png?alt=media&#x26;token=803f99c9-efe5-45d9-97f9-245f88087727" alt=""><figcaption></figcaption></figure></div>

## Opensea Settings

Configure your delay settings for sniping and monitoring on Opensea. You may notice rate limits when manually browsing Opensea while running Reflektor for listings. This is due to Reflektor monitoring and scanning for listings constantly. You may add a proxy into Reflektor, if you want.

<figure><img src="https://1290078551-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FA982xwl6F0tpLlie7WHW%2Fuploads%2FPJLu38nPMCVxKoy3PXFw%2Fimage.png?alt=media&#x26;token=89363e08-8e7d-4b49-93f5-26e1f105f268" alt=""><figcaption></figcaption></figure>

**1.) Set your Listing Delay to how often you want Reflektor to monitor Opensea in (Milliseconds).**

**2.) Set your Order Delay to how fast you want Reflektor to submit the transaction in (Milliseconds).**&#x20;

_THE DEFAULT ORDER DELAY IS 3,000 MS. DO NOT CHANGE THIS UNLESS YOU KNOW WHAT YOU'RE DOING. Sometimes Reflektor picks up listings too fast and frontruns the listing before order is valid by submitting a TX in an earlier block, which will autofail._

<figure><img src="https://1290078551-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FA982xwl6F0tpLlie7WHW%2Fuploads%2FAk3utwcFiz0Fi8fRodyK%2Fimage.png?alt=media&#x26;token=65485e1e-4cd0-4f7b-9375-449b99ed99d1" alt=""><figcaption></figcaption></figure>

## Quicktasks Settings

<figure><img src="https://1290078551-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FA982xwl6F0tpLlie7WHW%2Fuploads%2FEy6wmZSJjuXg4eZYretC%2Fimage.png?alt=media&#x26;token=bd00832e-029f-4c64-bd35-3d4b2eda0877" alt=""><figcaption></figcaption></figure>

**\[ Auto Start ]**

If you have Auto Start enabled, when you are scanning the Live Monitor... and quicktask a mint, it'll create the group and automatically start the tasks with it. Keep it Off to be safe.

**\[ Select Wallet Group ]**

Select the group you would like to use for quicktasks. By quicktasking, it'll create a task for every wallet in the group.

**\[ Auto Gas ]**

Auto gas will create tasks and use the current blocknative gas. If you would like to use your own GWEI settings make sure Auto Gas is OFF and you have your GWEI settings set below.

**\[ Extra Gas (%) ]**

On top of the current blocknative gas from Auto Gas, this option will increase it by the % you set.

**\[ Max Fee Per Gas & Max Priority Fee Per Gas]**

Default Settings for Quicktasks, if you are not using Auto Gas. Make sure to set these if you are using Auto Gas too.

## **Manage your Wallets**

<img src="https://1290078551-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FA982xwl6F0tpLlie7WHW%2Fuploads%2FS1z3HVQhvtkMxBexkBPb%2FShard%20Run.png?alt=media&#x26;token=6c33577b-d263-440d-9722-995e2da62578" alt="" data-size="original">
